102-Oz. Concrete Repair And Anchoring Epoxy - PC Products

Description

102-Oz. Concrete Repair And Anchoring Epoxy - PC Products
PC-Concrete epoxy gel is an anchoring and concrete repair product. PC Concrete has exceptional strength, maximum field reliability, along with a high heat deflection temperature of 134°F, which provides engineers and contractors with a choice for specifying and setting adhesive anchors in elevated temperature environments. PC Concrete out performs all caulks and hydraulic cement. PC Concrete will not come loose from any cleaned concrete surface. PC Concrete the best solution for permanent concrete repair. PC Concrete is a two component (1:1 ratio), 100 percent solids, high modulus, and structural epoxy gel. It is a solvent free, no odor, high strength, moisture-insensitive epoxy. In addition, PC Concrete has a long working time (20 minutes at 75°F), while providing a bolt down/paint time in as little as 4 hours. PC-Concrete has been tested in accordance with the ICC-AC58 Acceptance criteria for adhesive anchors in concrete and masonry elements. PC-Concrete is recognized for the following uses: static loads, seismic / wind loading, long term creep at elevated temperatures, static loading at elevated temperatures, damp holes, freeze thaw conditions, critical and minimum edge and spacing distances. Used as adhesive for wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations. Color (component a): White. Color (component B): Dark gray. Color (mixed): Concrete gray.
Two-part epoxy adhesive paste to fill and repair cracks in concrete
Also used to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and un-reinforced masonry
High-adhesion formula is up to 3 times stronger than concrete
High-tack paste resists moisture for application in damp environments and can be used in vertical applications
Can be used in indoor and outdoor applications
Application temperature range from 35 to 115°F
Service temperature range from -20 to +115°F
Provides work time of 20 minutes and cure time of 4 hours (at 75°F)
102-Oz. Concrete Repair And Anchoring Epoxy - PC Products
Product Depth (in.): 7.5
Product Size (oz.): 102
Product Width (in.): 15.5 in
Adhesion level: High
Adhesive Product Type: Glue/Epoxy
Dry Color: Brown
Features: Drillable,Moisture Resistant,Sandable,Solvent Resistant,UV/sunlight Resistant
Glue/Epoxy Type: Concrete Epoxy
Interior/Exterior: Interior/Exterior
Product Form: Paste
Product Weight (oz.): 102 oz
Recommended Surfaces: Brick,Cinderblock,Metal
Set Time (Min.): 20
Usage Location: General,Marine Environments,Masonry
102-Oz. Concrete Repair And Anchoring Epoxy - PC Products