Blue Monster 70888 BIG PFTE Pipe Thread Sealing Tape, 2" x 1429"

Description

Blue Monster 70888 BIG PFTE Pipe Thread Sealing Tape, 2" x 1429"
Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll that is 2" wide. Developed specifically for larger thread applications, Blue Monster BIG PTFE thread seal tape requires fewer wraps for a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze.
Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more. It can be used on pipes carrying the following:
Acids, concentrated
(see precautions) and Acids, dilute
Alcohols, Gasohol
Aliphatic solvents, Aromatic solvents, Chlorinated solvents
Ammonia, liquid
Caustics, concentrated
(see precautions)
Compressed air, Steam, Water
Cutting oils
Diesel fuel oil
Ethylene glycol, Glycerine
Fatty acids
Heating oils, Kerosene
Hydraulic fluids, Hydraulic oils
Hydrogen, gaseous and liquid, Inert gases, gaseous and liquid
Jet fuel
Ketones, Petroleum solvents
Liquid Petroleum Gas, Natural gas
Mineral oils, Vegetable oils
Nitrogen, gaseous and liquid
Soap, liquid
SPECIFICATIONS
Composition:
99.6% PTFE < 0.4%
Pigment Color:
Blue
Length:
1429"
Thickness:
0.0035" +/- 10%
Density:
0.8g/cm3
Elongation:
>100%
Tensile Strength:
15N / mm2
Pressure rating:
Mill-Rose Blue Monster Thread Sealing Tape has been used to seal fittings carrying water and oil at pressures up to 10,000 PSI or 69,000kPa
Note:
Pressure ratings are relative to the quality and torque of the fittings and the amount of tape used.
Temperature Range:
-450°F to +500°F (-268°C to +260°C) PTFE is completely stable up to +500o F or +260°C. Decomposition is slow up to 750°F or 400°C. Although decomposition will occur on contact with naked flames.
Fittings above 1½" (38mm) diameter.
Use 3/4" (19mm) wide tape for fittings up to 2" (51mm) in diameter. Use 1" (25mm) wide tape for fittings larger than 2" (51mm) in diameter.
Follow the directions under "Instructions".