-40%
DryWay Water-Repellent Sealer (5-gal) - Concrete Driveway Sealer That Lasts!
$ 62.83
- Description
- Size Guide
Description
DryWay Water-Repellent Sealerprotects concrete
driveways and sidewalks
against water, spills, molds, and deterioration. Treated concrete and masonry will
bead or shed water for years to come
, reducing
cracking, pitting, spalling, efflorescence, rebar corrosion, molds, and algae
.
Spills wipe off easily.
DryWay provides durable protection to concrete surfaces against attack from:
Surface water
Oil and chemical spills
Road salts
Freeze-thaw damage
Chlorine ions
Moss and molds
Airborne contaminants
This advanced penetrating concrete sealer
does not leave a film that will peel
or wear off but forms a
long-lasting
water-repellent barrier inside the concrete. It does not alter surface appearance or texture. The treated surfaces shed water or bead.
DryWay concrete sealer will keep your driveway dry! After a rain, it dries out soon while other driveways will still look dark because of all the absorbed water. Liquid spills can be easily wiped or washed off.
Snow and ice do not stick.
DryWay is
resistant to UV-rays
, heat, and oxidative degradation. Morever, it is hidden deep inside the pores from the sun and elements. It
will not yellow
and there is no gloss. The water-repellent sealer becomes an
integral part of the substrate
.
Service life up to 10 years!
Use DryWay
™
is effective on a wide range of concrete and masonry substrates, horizontal and vertical:
New or old concrete
Fiber-reinforced concrete, colored concrete
Concrete block walls
Splitface blocks, lightweight CMU's
Mortar, grout, stucco
Brick, brick veneer walls
Pavers, flagstones, adobe, Terra cotta
Sandstone, limestone, granite
Residential Uses:
Garage floors, driveways, patios, pool decks, pavers, chimneys, veneer walls, etc.
Commercial Uses:
Parking garage, industrial floors, building exteriors, concrete roofs, marinas, bridge decks, airport pavements, cooling towers, statues, etc.
COVERAGE
Poured Concrete: 1,000 sq. ft.
Brick & Pavers: 750 sq. ft.
Concrete Blocks: 600 sq. ft.
Splitface Blocks: 400 sq. ft.
APPLICATION
Spray on with a hand-pump garden sprayer or adjustable airless (or roller). Apply DryWay
in a saturating film (on verge of puddliing). For vertical surfaces, apply from the bottom up allowing 4-6" controlled run down. Do not over apply. Spread out puddles with a roller or push broom until the sealer penetrates into the substrate.
Thank you for your business!
RadonSeal®