EPOXY RESIN 2 Gal kit CRYSTAL CLEAR, Super Gloss Coating and Table Tops HOBBY

Description

EPOXY RESIN 2 Gal kit CRYSTAL CLEAR, Super Gloss Coating and Table Tops HOBBY
EPOXY RESIN 2 Gal kit CRYSTAL CLEAR, Super Gloss Coating and Table Tops HOBBY
HOBBY-CAST
Professional Grade General Use
Low viscosity, convenient 1:1 mix ratio by volume, room temperature curing system with great clarity and a high gloss finish.
This resin cures very hard and has very nice air release.  Excellent chemical and water resistance(s).
Perfect for
tabletops
,
fiberglass work
,
small castings
(under 1"),
electrical potting
,
jewelry making
,
concrete
-
pebble coating
,
marine applications
-
boat building
,
river tables, coating artwork, and creating tumblers.  Are you making a river table?  Please contact us.
Formulated to meet a variety of applications.  Specially designed with Low viscosity, convenient 1:1 mix ratio by volume, long pot life, room temperature curing system with great clarity and a high gloss finish. "Cures clear
like
glass"
This product cures very hard and exhibits good air release.  Excellent chemical and water resistance(s), coupled with superb mechanical properties, make this resin a candidate for all applications.
Perfect for
tabletops
,
fiberglass work
,
small castings
(under 2"),
electrical potting
,
jewelry making
,
concrete
-
pebble coating
,
marine applications
-
boat building
, &
wood
water proofing
-
repairs
.
Typical Properties
:
Mix Ratio.......................................1:1 by volume
Pot-Life .........................................45-50 minutes (100gram mass)
Hardness.......................................D78
Mixed Viscosity............................1200cps.
Tensile Strength, psi....................7,500
Compressive Strength, psi.........15,400
Linear Shrinkage, in/in.................0008
Chemical Resistance....................excellent
Moisture Resistance.....................excellent
Dielectric Strength, (volt/mil).......550
Dielectric Constant, 1mhz............3.2
Product weight..............................8 pound
Cure Speed
This product provides fast cure.  Typical pot-life on this item is roughly 30-50 minutes based on mass and temperature.  Thin film set time (3mil. film) is roughly 3 - 5 hours at 78F.  Making river tables or large castings?  You can go as deep as you like.  Just make sure to work in stages.  Please stay under 1" per pour.  Wait 3-4 hours before your second pour.
This product cures to a brilliant high gloss finish.  The finished product will be very rigid, smooth, clear, and display a brilliant high gloss finish similar to glass.  Excellent for tumblers, art, wood coating (tabletops) and any application requiring high grade American made resin
Mixing, Storage, and Application
Mix this resin 1:1 by volume.  If mixing by weight, mix 100 parts of resin into 83 parts of hardener.  When mixing this product, make sure to use a round cup & mix thoroughly scraping all sides and bottom of mixing container.  Improperly mixed epoxy can create a major headache.  Remember that thermoset plastics are temperature sensitive.  Cold weather slows the cure process down, whereas heat speeds curing up.  Always try to mix chemicals at room temperature.  For best results, try pouring epoxy into hardener.  Pour along the side of the container to help alleviate air entrapment.  Mix for at least 3-5 minutes in a in a round motion until chemical are clear and free of striations.  Small castings and potting units may take longer to cure than larger items.  For large pours of 1", mix and pour right away!  The mix will get too hot if you let stand in the mixing containers too long
This chemical needs to be stored in a dry, safe, temperature controlled environment.  Always keep the lids tightly sealed when not in use.  Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener.  Moisture is also a potential issue.  Always keep the bottles sealed when not in use.
When applying this product, use gloves, goggles, and proper safety equipment.  Please refer to the safety data sheet before using any of our epoxy products.
SHIPPING
:
Our warehouse ships items within 1 business day.  We ship FedEx and will forward all tracking information once your item has shipped.  Please be advised that our normal business hours are Monday to Friday.  FedEx usually has 5 day transit if not in a rural area.  All together, it should take about 5-6 days to arrive.
RETURNS:
Our goal is to provide quality products and keep our customers happy.  If you are not satisfied with your purchase, we will issue you a full refund. We do ask that the buyer pays for return shipping.
Thank you for looking at our products! At The Pen Kit Mall we can assure you that we will give you the best possible experience purchasing on Ebay. We strive for 100% however if we should fall short of our goal please reach out to us to solve any issues that should arise before leaving negative feedback.  Give us a chance to make it right.