MINI 12G SDI Fiber With LOOP 20KM

Description

1. Description
This 12G SDI TX&RX MINI BOX are fiber optic serial digital video transmission units that offer the industry's broadest range of digital rates 11.88Gbps bandwidth while maintaining the signal quality that broadcasters demand.
The transmitter accepts a 75ohm BNC input and converts it into an optical stream via a standard ST connector and local 75ohm BNC out.
The transmitter BNC include equalization and reclocker for long lengths of coaxial cable, so you can use them at nearly any point in your SDI chain.
The receiver unit reconverts the uncompressed signal back to two BNCs output.
Both the transmitter and receiver modules include LED indicators to display Power On, SDI signal presence and optical fiber presence. The units use +5 TO 30V power supply
2. Feature
Supports SMPTE 2082-1, SMPTE 2081-1,SMPTE 424M, SMPTE 292M, and SMPTE 259M (C) Serial Digital Video Standards
Supports 125 Mbps 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.967 Gbps, and 2.97 Gbps Serial Data Rate Operation
Supports DVB-ASI at 270 Mbps, and MADI at 125 Mbps
Input Cable Equalization 12G:70m, 6G:90m, 3G:180m, HD-SDI:250m SD-SDI:400m@Belden 1694A
Output Cable Reach
12G:70m, 6G:90m, 3G:180m, HD-SDI:250m SD-SDI:400m@Belden 1694A
Supports embedded audio
SDI Loop Out on the transmitter side
SDI Loop Out on the Receiver side
75ohm BNC input and output port
ST Fiber Receptacle
Up to 20km distance @ Singlemode Fiber default
Maximum distance up to 80 km@ Singlemode Fiber
+5 TO 30V DC power supply
3. Specifications
Description
Parameter
Test Conditions
BNC
SMPTE Standard
Omnitek
BNC
75 OHM
Agilent System
Date Rate
125 Mbps,
270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.967 Gbps, 2.97 Gbps,
5.94 Gbps, 11.88 Gbps,
Omnitek
Standart
SMPTE 424M, SMPTE 292M, and SMPTE 259M (C) ,DVB-ASI,MADI, SMPTE 2082-1, SMPTE 2081-1
Omnitek
Cable Equalization
12G:70m, 6G:90m,3G:180m, HD-SDI:250m SD-SDI:400m
Belden 1694A
Cable Out Reach
12G:70m, 6G:90m,3G:180m, HD-SDI:250m SD-SDI:400m
Belden 1694A
Jitter
<0.2UI
11.88Gbps @100KHZ
Eye Overshoot
Amplitude<10%
11.88Gbps
Rise/Fall time
40ps
11.88G bps SDI Signal
Fiber
SFP Bandwidth
12 Gbps
Agilent System
SFP Support
1310nm Band and CWDM Band 1270-1610nm
Fiber Receptacle
ST Port
Fiber Distance
20km Default
Singlemode@G652D
Maxmium Fiber Distance
80km
Singlemode@G652D@Long Wave Band
Fiber Type
Singlemode
Others
Input Power
5V TO 30V DC @1A
Power Consumption
2W
Power Surge Protect
YES
Operating Temp.
-20 to 60
Storage Temp.
-40 to 85
Operating Humidity
20-80%
Weight
0.5Kg
Dimmension
120*55*22mm
Warranty
3 Years Free Warranty
4. Package List
12G SDI Transmitter*1
12G SDI Receiver*1
Power Adapter*2
5. Installation
Connect the provided DC power supplies to the power socket of the transmitter and receiver
Connect SDI cable between the SDI video source and the transmitter BNC input
Connect SDI cable between the receiver BNC output and the SDI video monitor or SDI DVR
Connect ST fiber between the transmitter and the receiver ST Receptacle
6. Notes
A. No video output and some one of the three LEDs not lighted
Please check the power supply if work
please check the video source if work
please check the coaxial cable BNCs if all tightened well
please check the ST fiber if inserted well
B. There is video display, but video flash
please check the video source format if right
please check the coaxial cable BNCs if all tightened well
please check the ST fiber if inserted well
this issue happens often when the ST end face is dirty
For long range application, please check the fiber transfer link-budget, if it is too long, the received optical signal is very weak, and may be out of receiver reclocker capacity and fail to recover the useful signals
7. Warranty
Thank you very much for using our products
The warranty time is three years and life-long maintenance. During this period, any belongs to under normal usage circumstance cause because of the product quality’s problem of breakdown, our company will be responsible for giving free maintain
Free maintain won’t be given under the following circumstance:
The malfunction and damaged caused by incorrect use, the unauthorized repairs and alteration
The damage caused by fire, flood, abnormal voltage, other natural disasters and secondary product damage
The product malfunction caused by not in accordance with the user manual operation
The malfunction and damaged caused by the other barriers(man-made factors or external device)