RadonSeal Plus Penetrating Concrete Sealer (5-gal) - Basement Concrete Sealer

Description

RadonSeal® Plus Concrete Sealer prevents the transmission of water seepage, water vapor, efflorescence and even radon gas. Backed by a Lifetime Money-Back Guarantee!
RadonSeal® has been the most trusted and widely-used concrete sealer for both construction and residential projects. RadonSeal is a reactive, internal sealer for concrete, mortar, and other cementitious materials. The sealer penetrates deep into concrete
(up to 4")
, reacts, expands inside the concrete pores and cures as a hard silicate mineral.
THE SEAL IS PERMANENT!
Unlike common surface sealers
(membrane coatings)
or waterproofing paints sold in stores, RadonSeal will never peel off or wear away. There is no need to ever reapply the product again! Once RadonSeal has cured inside the concrete, it can not be pushed out regardless of hydrostatic pressure. The seal becomes integral to the concrete providing hardness and durability.
Think of it like injecting more cement into the concrete!
RadonSeal® Plus seals concrete floors and concrete block and cinder block walls, indoors or outdoors. Strengthens and preserves concrete. Prevents concrete pitting and spalling due to freeze-thaw, road salts, and chemicals. Hardens the surface. Stops efflorescence and concrete dusting.
USE TO WATERPROOF CONCRETE WALLS AND FLOOR
– RadonSeal is the heaviest available silicate-based sealer, which penetrates deeper, carries more active minerals, and seals tighter than any other concrete sealer. The penetration does not depend on gravity – it is also used on walls and ceilings. In case of basement walls, RadonSeal is normally applied to interior walls to seal against water seepage, water vapor, and radon gas from theground. However, if there is an opportunity to apply it to the outside, it has the added advantage of preserving the exterior of the concrete and extending the life of waterproofing coating.
USE AS A CONCRETE PRIMER
– Because RadonSeal protects concrete against water vapor, efflorescence, and the "alakli attack" it is commonly used by flooring contractors as a concrete primer. RadonSeal is suitable for use before applying paints, adhesives, epoxy floor coatings, concrete overlays, surface levelers, membrane "wet-look" coatings and before the installation of moisture sensitive flooring.
USE TO AS A CONCRETE DENSIFIER
– Once cured, RadonSeal makes concrete denser and stronger
(up to 40% in flexural strength)
. Use on polished or non-polished concrete surfaces to reduce dusting, crumbling, and overall wear.
Safe and easy spray-on application for homeowners or contractors.
Environment-friendly, non-hazardous sealer with no fumes or noxious odors. Contains zero VOCs.
COVERAGE:
2 applications will cover 1,000 sq. ft. for poured concrete.
3 applications will cover 500 sq. ft. for concrete blocks
4 applications will cover 400 sq. ft. for cinder blocks
APPLICATION:
Hand-pump "garden" sprayer, or roller
(3/4" nap)
* visit our website for detailed information (radonseal.com)
Thank you for your business.
RadonSeal®