Stone Sealer #1 for Marble Granite Travertine Limestone Brick & Slate 1 gallon

Description

1 Gallon of Stone Sealer #1
Stone Sealer #1
is a reactive silicone polymer in a low odor mineral spirits. It impregnates the natural stone surface to form an invisible protective barrier. It produces a natural or invisible finish (no sheen) and does not alter the appearance of the stone surface. This sealer is a low odor solvent based product and is widely used by the professionals in the stone fabricating industry. It seals all types of natural stone including marble, granite, travertine, slate and limestone.
Stone Sealer #1
will cover approximately 500 square feet per gallon for each application. We recommend applying two coats approximately 2 hours apart rather than one thick coat. Do not over apply the sealer and remove any excess from the surface within 5 minutes using a clean dry white cloth. The natural stone surface should be kept completely dry while the sealer is curing for 24 hours. Apply with either with a micro fiber cloth on small areas such as counter tops. However, for larger floor or wall areas apply or with a very short nap (1/8″) roller. We recommend that a single top up application is re-applied on top of the old sealer every 2 to 3 years.
S&H is FREE in USA(48)
Please contact technical support if you have any questions
We offer a 100% guarantee that anything you buy from us will be exactly as described that you will be 100% satisfied or you can send it back for a 100% refund.
THANK YOU FOR VISITING OUR AUCTIONS!!!